TX200 MK3 spring length?

[sparker]

Good evening, would someone be kind enough to inform me of the length of a standard AA spring in a MK3 TX200 in .177? Mine has a V-mach kit fitted and I suspect that the V-mach spring in longer.

Many thanks
Simon

[Stokie99]

Don't worry about the length put it over a chrono and check the power .

[sparker]

How will that tell me how long the spring is?

[gary martin]

i would suspect the vmac spec will have a longer spring. i am under the impression that the piston weight is not used with vmac, the spring would need to take up the distance the P/Weight would have taken.

[sparker]

i would suspect the vmac spec will have a longer spring. i am under the impression that the piston weight is not used with vmac, the spring would need to take up the distance the P/Weight would have taken.

My thoughts exactly. I have been thinking about a TBT short stroking kit but I don't think it will work with the V-mach spring because it is longer.

[pelletcaster]

Hi sparker,
Here my measurements (metric) of the original spring (AA TX200 HC)

length 220,00
oute dia 21,00
inner dia measured 15,00
inner dia calculated 15,10
coil dia measured 2,95
coil dia calculated 3,00
winds 25,00
average distance between coils/winds 6,40
weight 90,00

Hope this is helpful.
Happy shooting - Andreas

[sparker]

Many thanks pelletcaster