Page 1 of 30

Julian Bonds spares

Posted: Mon Feb 16, 2015 6:45 am
by Blackbaronfish
bgaltd spares only in this section
http://www.airarmsspares.com/

BBF

Re: Julian Bonds spares

Posted: Tue Feb 17, 2015 7:33 pm
by ditchdangler
Looking for loading bolt seals S200 .177 I think part number = CZ014 can you help, how much

Re: Julian Bonds spares

Posted: Tue Feb 17, 2015 7:56 pm
by eboswan
ditchdangler wrote:Looking for loading bolt seals S200 .177 I think part number = CZ014 can you help, how much


Julian is away for a few days,,no doubt he will be in touch soon :)

Re: Julian Bonds spares

Posted: Tue Feb 17, 2015 10:46 pm
by ditchdangler
eboswan wrote:
ditchdangler wrote:Looking for loading bolt seals S200 .177 I think part number = CZ014 can you help, how much


Julian is away for a few days,,no doubt he will be in touch soon :)



Ok thanks

Re: Julian Bonds spares

Posted: Wed Feb 18, 2015 5:47 pm
by bgaltd
ditchdangler wrote:Looking for loading bolt seals S200 .177 I think part number = CZ014 can you help, how much



back from Cornwall :D :D .

CZ014 3 X 1 NBR 70 LOADING BOLT O RING £0.42 - 0.04 =0.38 each

how many do you want ?

Re: Julian Bonds spares

Posted: Wed Feb 18, 2015 8:04 pm
by ditchdangler
Hi Julian, many thanks for the rapid response, I am looking at other bits and pieces and will get back to you tomorrow with a shopping list.

Regards - Alan

Re: Julian Bonds spares

Posted: Thu Feb 19, 2015 7:29 pm
by raider
Julian, I am considering making my S410 into an Air Scout Carbine, So I would need to use a long eye relief scope or optics mounted well forward of the current Scope mounting rail. Do you know if the adjustable barrel mounted scope rail off the S 200 part number DV021 would be retro fittable to the S410? and what price the part is please?

Re: Julian Bonds spares

Posted: Thu Feb 19, 2015 7:50 pm
by wastrel
raider wrote:Julian, I am considering making my S410 into an Air Scout Carbine, So I would need to use a long eye relief scope or optics mounted well forward of the current Scope mounting rail. Do you know if the adjustable barrel mounted scope rail off the S 200 part number DV021 would be retro fittable to the S410? and what price the part is please?

as long as the 200 barrel is same outer size/diameter or larger it will or could be made to- work, so if you find the two outer diameter sizes, you`ll know. if any member could post the diameter size of a 400 barrel, the 200 barrel is (off to find my calipers, bear with me!) ahem, 15mm- 15.14 to be exact but I`ll put the .14 down to me not being an engineer!

Re: Julian Bonds spares

Posted: Thu Feb 19, 2015 8:46 pm
by bgaltd
unless you have the S200 barrel on your 400 it(CZ004 SIGHT BASE) wont fit .

have you considered reach forward mounts ?

Re: Julian Bonds spares

Posted: Thu Feb 19, 2015 10:28 pm
by raider
Ok Thanks guys , plan B it is, there was a purpose made Picatinny rail mount sold in the US for the S410 but its discontinued, I'll try and find something else. Appreciate your time chaps, cheers.