Page 1 of 1

S510 spares needed

PostPosted: Thu Nov 23, 2017 7:15 pm
by Roger5
Hi Julian hope you and Carol are well, need some more bits for a mates S510, here we go, S306 X1, E146 x4, TX227 x4, S142 x4, S331 x1, S427 x4, RN219-9 x4 let me know how much I owe, and I will get it off to you, love to Tilly. Rog

Re: S510 spares needed

PostPosted: Thu Nov 23, 2017 7:39 pm
by bgaltd
Roger5 wrote:Hi Julian hope you and Carol are well, need some more bits for a mates S510, here we go, S306 X1, E146 x4, TX227 x4, S142 x4, S331 x1, S427 x4, RN219-9 x4 let me know how much I owe, and I will get it off to you, love to Tilly. Rog

as requested Rog :-)

S331 MAIN SPRING 3.75- 0.38= 3.38
E146 3MM DIA NYLON66 BALL - COCKING ARM FRICTION PAD 0.44- 0.04= 0.40x4=1.60
TX227 BUFFER 0.63- 0.06= 0.57x4=2.28
S142 DETENT BUFFER .177 1.24 X 2.62 NBR 70 (BS102) 0.44- 0.04= 0.40x4=1.60
S306 FIRING VALVE SPRING 2.04- 0.20= 1.84
S427 6 X 1 O RING 70 SHURE NITRILE 0.44- 0.04= 0.40x4=1.60
RN219-9 BS011 NBR 70 O RING - SPIGOT 70 SHORE (WAS S646) 0.44- 0.04= 0.40x4=1.60

postage £2.20

total £16.10

kind regards to you and yours.

julian

ps. Tilly is saving all her dog snogs for you :-) :-) .

Re: S510 spares needed

PostPosted: Fri Nov 24, 2017 8:42 am
by Roger5
bgaltd wrote:
Roger5 wrote:Hi Julian hope you and Carol are well, need some more bits for a mates S510, here we go, S306 X1, E146 x4, TX227 x4, S142 x4, S331 x1, S427 x4, RN219-9 x4 let me know how much I owe, and I will get it off to you, love to Tilly. Rog

as requested Rog :-)

S331 MAIN SPRING 3.75- 0.38= 3.38
E146 3MM DIA NYLON66 BALL - COCKING ARM FRICTION PAD 0.44- 0.04= 0.40x4=1.60
TX227 BUFFER 0.63- 0.06= 0.57x4=2.28
S142 DETENT BUFFER .177 1.24 X 2.62 NBR 70 (BS102) 0.44- 0.04= 0.40x4=1.60
S306 FIRING VALVE SPRING 2.04- 0.20= 1.84
S427 6 X 1 O RING 70 SHURE NITRILE 0.44- 0.04= 0.40x4=1.60
RN219-9 BS011 NBR 70 O RING - SPIGOT 70 SHORE (WAS S646) 0.44- 0.04= 0.40x4=1.60

postage £2.20
Hi Julian, can I add 4 x FP121 .177 Breech seals please, Rog
total £16.10

kind regards to you and yours.

julian

ps. Tilly is saving all her dog snogs for you :-) :-) .

Re: S510 spares needed

PostPosted: Fri Nov 24, 2017 8:48 am
by Roger5
Hi Julian, can I add 4x FP121 .177 Breech seals, Rog

Re: S510 spares needed

PostPosted: Fri Nov 24, 2017 9:04 am
by bgaltd
Roger5 wrote:Hi Julian, can I add 4x FP121 .177 Breech seals, Rog


sure :-) . new total is £17.70.

Re: S510 spares needed

PostPosted: Fri Nov 24, 2017 2:40 pm
by Roger5
Hi Julian, money on way, cheers Rog

Re: S510 spares needed

PostPosted: Fri Nov 24, 2017 4:46 pm
by bgaltd
Roger5 wrote:Hi Julian, money on way, cheers Rog


will post asap :-)

Re: S510 spares needed

PostPosted: Wed Nov 29, 2017 1:39 pm
by Roger5
bgaltd wrote:
Roger5 wrote:Hi Julian, money on way, cheers Rog


will post asap :-)

Hi Julian, everything arrived ok, thanks Rog