Julian, Broken stock

no avatar
Aitch
Posts: 293
Joined: Mon Feb 16, 2015 7:03 am

Julian, Broken stock

Mon Aug 10, 2015 3:29 pm

hi Julian, I wonder if you can help me. My EV2 MK2 stock has broken across the hand from the trigger recess to the thumb up point, whilst I have had it repaired (glued)I would still like to replace it. Obviously I have all the fixtures and fittings with the original, my question is can i buy just the stock and if so how much would it be? I also would like to order 4 x E476 bolts, please let me know costs and payment details, Thanks
Regards
Aitch

User avatar
bgaltd
Posts: 937
Joined: Sun Feb 15, 2015 6:53 pm
Location: Somerset
Contact:

Re: Julian, Broken stock

Mon Aug 10, 2015 6:04 pm

i'll need to make sure that the mk4 stock will fit the mk2 and get back to you . prices are below:-

E510/2 EV2 STOCK MK4 GREY LAM - 3 COMPONENT NO METAL WORK RH 468.70- 70.30= 398.40
E510/2PW EV2 STOCK MK4 WHITE/BLACK POP - 3 COMPONENT NO METAL WORK RH 468.70- 70.31= 398.40
E510-1/2 EV2 STOCK MK4 GREY LAM - MAIN BODY RH 347.05 - 52.06= 294.99
E510-1/2PW EV2 STOCK MK4 WHITE POPLAR - MAIN BODY RH 347.05- 52.06= 294.99
E510-2/2 EV2 STOCK MK4 GREY LAM - FORE-END PIECE 66.92- 10.04= 56.88
E510-2/2PBK EV2 STOCK MK4 BLACK POPLAR - FORE-END PIECE 64.83- 9.72= 55.11
E510-3 EV2 STOCK MK3 & MK4 GREY LAM - CHEEK PIECE RH 64.83- 9.72= 55.11
E510-3PBK EV2 STOCK MK3 & MK4 BLACK POPLAR - CHEEK PIECE RH 66.92- 10.04= 56.88
plus shipping.

E476 M5 X 8 SKT BTN / BUTT PAD ARM LOCKING SCREW ST/ST 0.44- 0.04= 0.40 each

rgds.

julian.

ps. i did answer your other enquiry regarding this but i guess you must have missed it :-(.

no avatar
Aitch
Posts: 293
Joined: Mon Feb 16, 2015 7:03 am

Re: Julian, Broken stock

Tue Aug 11, 2015 6:10 am

Thanks for the reply, yes I did miss your earlier feedback ,sorry!. I suspect that the mark 4 stock may not work as the butt metalwork, the cheek piece and the hamster are attached by single posts, on the mark 2 they are on double posts, if that is the case I will stick with the repaired stock for now. However I would like to buy 4 of the E476 locking screws for the butt please, can you please let me know how to pay for them and I will pm you with my address or any other details you may need.
Regards
Aitch

User avatar
bgaltd
Posts: 937
Joined: Sun Feb 15, 2015 6:53 pm
Location: Somerset
Contact:

Re: Julian, Broken stock

Tue Aug 11, 2015 7:53 am

Aitch wrote:Thanks for the reply, yes I did miss your earlier feedback ,sorry!. I suspect that the mark 4 stock may not work as the butt metalwork, the cheek piece and the hamster are attached by single posts, on the mark 2 they are on double posts, if that is the case I will stick with the repaired stock for now. However I would like to buy 4 of the E476 locking screws for the butt please, can you please let me know how to pay for them and I will pm you with my address or any other details you may need.
Regards
Aitch



payment details are on the spares website below :-) . postage will be £1.20 :-) .

Post Reply

Who is online

Users browsing this forum: No registered users and 34 guests