tx200 mk2 ???

User avatar
eddie666
Posts: 177
Joined: Mon Feb 16, 2015 6:33 pm

tx200 mk2 ???

Mon Feb 16, 2015 6:48 pm

hi all . can any one tell me what spec the tx200 mk2 has,

ive just bought a used tx200 .22 16255 number no barrel shroud apart from the very end ,
it has 4 anti bear trap groves = I I II three are evenly spaced with the last 4th close to the third.

some may say its a mk2 late model but with a mk3 longer stroke ??????? any info would help.
i also have a mk3 tx200 .22 1998 year
prosport 177 2015 walnut
tx200 .22 1998 mk2
walther lgv comp ultra 1.77 2014
walther lgu .22 2014

User avatar
Blackbaronfish
Posts: 3690
Joined: Sun Feb 15, 2015 6:20 pm
Location: Nuneaton

Re: tx200 mk2 ???

Mon Feb 16, 2015 8:56 pm

You could ring AA direct and ask them for some information based on the serial number you give them.

BBF
Did I mention that I'm the only one to have attended EVERY meet since we started

User avatar
eddie666
Posts: 177
Joined: Mon Feb 16, 2015 6:33 pm

Re: tx200 mk2 ???

Wed Feb 18, 2015 1:45 am

Blackbaronfish wrote:You could ring AA direct and ask them for some information based on the serial number you give them.

BBF



e mailed them , they said it is a 1998 last of the mk2, ive just used some of the bluing gel on the barrel , now it looks like new.
the bluing gel works great for worn and mild rusting barrels ,
prosport 177 2015 walnut
tx200 .22 1998 mk2
walther lgv comp ultra 1.77 2014
walther lgu .22 2014

no avatar
FPoole
Posts: 339
Joined: Mon Feb 16, 2015 2:37 am

Re: tx200 mk2 ???

Fri Feb 20, 2015 2:11 am

You could cock both guns and check the angle of the cocking arms. This would tell you if the stroke is the same. I once had a MarkII with a 16,000 serial number and it had MarkIII stroke. I bought it used and it could have been changed because it had a 25 coil FAC spring and was doing 725 fps with .177 Exacts in 8.44 cr. I dropped in a new spring 29 coil and it went up to 880 fps.

User avatar
eddie666
Posts: 177
Joined: Mon Feb 16, 2015 6:33 pm

Re: tx200 mk2 ???

Sat Feb 21, 2015 12:52 am

will the mkII and mkIII have the same size piston seal ?
prosport 177 2015 walnut
tx200 .22 1998 mk2
walther lgv comp ultra 1.77 2014
walther lgu .22 2014

no avatar
FPoole
Posts: 339
Joined: Mon Feb 16, 2015 2:37 am

Re: tx200 mk2 ???

Sat Feb 21, 2015 2:42 am

All TX's and Pro Sports take the same seal. You will find some have slightly tighter comp. tubes, but all take the same seal.

User avatar
eddie666
Posts: 177
Joined: Mon Feb 16, 2015 6:33 pm

Re: tx200 mk2 ???

Sat Feb 21, 2015 10:44 am

FPoole wrote:All TX's and Pro Sports take the same seal. You will find some have slightly tighter comp. tubes, but all take the same seal.



thanks for that, very helpful.
prosport 177 2015 walnut
tx200 .22 1998 mk2
walther lgv comp ultra 1.77 2014
walther lgu .22 2014

Post Reply

Who is online

Users browsing this forum: Google [Bot] and 28 guests