Rubber butt pad

Rubber butt pad

Postby chrisanewby » Sun Aug 27, 2017 8:06 am

Hi, it's my first time on here so be gentle, iv'e just acquired an FTP 900 and
was wondering if anyone new of a way of replacing the Terminator style
shoulder pad with an adjustable rubber Butt pad, iv'e seen a picture with
one but not sure where it was purchased.
thanks.
chrisanewby
 
Posts: 1
Joined: Sun Aug 27, 2017 7:54 am

Re: Rubber butt pad

Postby TenMetrePeter » Sun Aug 27, 2017 9:21 am

Hello and welcome!

if yours is like this...
FTP-900-butt.png
FTP-900-butt.png (174.05 KiB) Viewed 227 times


then any rubber pad, either a standard Bisley type from ebay or an MPR type from Julian on this site, might screw (very carefully) into the end of the stock if it's deep enough, but the length of pull would be 1 to 2 inches shorter.

BTW I'll give you a tenner for the old one :lol:
Last edited by TenMetrePeter on Sun Aug 27, 2017 10:05 am, edited 2 times in total.
S400 MPR Precision 10m.
Green Belt in Ludo
My Youtube
User avatar
TenMetrePeter
 
Posts: 562
Joined: Wed Jun 29, 2016 5:40 pm
Location: Luton England NOT EU

Re: Rubber butt pad

Postby TenMetrePeter » Sun Aug 27, 2017 9:31 am

BTW my MPR pad has plain nylon spacers that I got from Ebay. You could use longer ones and longer woodscrews I guess.

The distance between fixing hole centres on MPR pad is 90mm.

Screen Shot 2017-08-27 at 10.27.00 (1 of 1).jpg
Screen Shot 2017-08-27 at 10.27.00 (1 of 1).jpg (34.47 KiB) Viewed 226 times
S400 MPR Precision 10m.
Green Belt in Ludo
My Youtube
User avatar
TenMetrePeter
 
Posts: 562
Joined: Wed Jun 29, 2016 5:40 pm
Location: Luton England NOT EU


Return to General airgun chat

Who is online

Users browsing this forum: No registered users and 3 guests