Anti tamper hammer adjustment removal held

Anti tamper hammer adjustment removal held

Postby Mhopton » Wed May 24, 2017 1:05 pm

Hi I've a mk3 S200 and the hammer spring is in need of replacing easy yes but it's got the anti bloody tamper type adjustment fitting I've tried everything with nothing but stress I've loosened the little grub screw give it some heat nothing even tried to drill a couple of tiny holes to get something in to turn it but it will not move , anything I'm missing out please please say or suggestions are very welcome
Atvb Mark
Mhopton
 
Posts: 7
Joined: Tue May 31, 2016 11:45 pm

Re: Anti tamper hammer adjustment removal held

Postby Roger5 » Wed May 24, 2017 7:02 pm

Mhopton wrote:Hi I've a mk3 S200 and the hammer spring is in need of replacing easy yes but it's got the anti bloody tamper type adjustment fitting I've tried everything with nothing but stress I've loosened the little grub screw give it some heat nothing even tried to drill a couple of tiny holes to get something in to turn it but it will not move , anything I'm missing out please please say or suggestions are very welcome
Atvb Mark

You could have a look on youtube Airarms S200 anti tamper removal, probably wants a bit more heat. Rog
Roger5
 
Posts: 589
Joined: Sat Jul 25, 2015 8:04 am
Location: Hampton, Middlesex

Re: Anti tamper hammer adjustment removal held

Postby Mhopton » Wed May 24, 2017 11:03 pm

Thanks for replying, I've gone through you tube and my eyes can't take any more just don't seem to be able to find anything regarding the tool needed ,if I apply any more heat it'll melt . The thread lock melted with the little pug of smoke and she still tight, I've even tried drilling but this isn't happening in the slightest I've done 4mk1and mi2 but never with the anti tampering issues help
Mhopton
 
Posts: 7
Joined: Tue May 31, 2016 11:45 pm

Re: Anti tamper hammer adjustment removal held

Postby neil » Thu May 25, 2017 10:45 am

dremel, small grinding disc, cut slot for screwdriver, job done
neil
 
Posts: 119
Joined: Sun Feb 15, 2015 11:10 am

Re: Anti tamper hammer adjustment removal held

Postby Mhopton » Thu May 25, 2017 11:38 am

Yes mate I'm sure that's easiest way but with out sounding ungrateful that was what my plan was but who I got it off have already screwed in in so you can't get at it I'll post some photos when home from work tonight
Mhopton
 
Posts: 7
Joined: Tue May 31, 2016 11:45 pm


Return to General airgun chat

Who is online

Users browsing this forum: No registered users and 1 guest