Page 1 of 1
s400 cylinder swap
Posted: Tue Mar 07, 2017 9:19 pm
by Paulmurd
If i replace my carbine cylinder with a classic then fitted a moderator adapter to accept a hw100 screw on moderator would it have enough clearance above the cylinder? Im just trying to do it without needing something specifically made. Any help would be appreciated. Thanks
Re: s400 cylinder swap
Posted: Tue Mar 07, 2017 9:48 pm
by Roger5
Short answer is no mate. If you can afford it, buy the longer barrel aswell. Rog
Re: s400 cylinder swap
Posted: Tue Mar 07, 2017 10:32 pm
by Paulmurd
My mate said the longer barrel is really awkward to fit. Is that true?
Thanks
Re: s400 cylinder swap
Posted: Wed Mar 08, 2017 8:06 am
by Roger5
Paulmurd wrote:My mate said the longer barrel is really awkward to fit. Is that true?
Thanks
Don't see why, as long as antitamper is out, two screws on top of breech block and one underneath, sometimes the seal holder comes out with the barrel, but not always, but if it dosnt don't worry about it. Rog
Re: s400 cylinder swap
Posted: Wed Mar 08, 2017 10:47 am
by Paulmurd
Thanks mate