SMK xs 19 part 1 the evaluation

User avatar
roadrunner
Posts: 294
Joined: Tue Feb 17, 2015 1:12 pm

SMK xs 19 part 1 the evaluation

Tue Mar 10, 2015 9:26 pm

Yes i bought it, warts and all, came with a 4x32 crosman scope, tested the power and its warm but ok for now,shot it on sunday and its ok not prosport good but for 65 quid its pretty dam good ended the session shooting a 177 pellet tin at 46 yrds every shot,so why when ive got a prosport would i ever want such a gun, ive fancied a .22 calibre rifle for a while but i dont know weather i can cope with the loopy bigger pellet,at the range iam going to use it 15-20 yrds ratting it makes no differance but the bigger pellet certainly imparts more knock down energy
things i like are the barrel accuracy, lock up is tight, stock to action fit, stock shape, smooth shot cycle,no twang, beartrap fitted and its quiet
things i dont like are stock finish, trigger is heavy and gritty, graunching noise on cocking,short length of pull and pistol grip isnt long enough

So its a project gun that ive got about 50 quid to spend on it before it cost more than a new xs 19, so iam looking at a welsh willy trigger and polishing the sears, a full strip clean debur and polish,ive found some delrin guides cheapish on the bay and maybe a titan spring and piston liner,finally the bleach blonde stock will get stained and altered
Attachments
2015-03-10 20.47.08.jpg
2015-03-10 20.47.08.jpg (107.58 KiB) Viewed 1688 times
2015-03-10 20.50.31.jpg
2015-03-10 20.50.31.jpg (92.97 KiB) Viewed 1688 times
2015-03-10 20.52.06.jpg
2015-03-10 20.52.06.jpg (102.27 KiB) Viewed 1688 times

no avatar
wastrel
Posts: 876
Joined: Sun Feb 15, 2015 5:26 pm

Re: SMK xs 19 part 1 the evaluation

Tue Mar 10, 2015 10:46 pm

Brilliant, & when you`re done, you can make a start on my Westlake, now, `Runner, gotta say, mine is a custom job (-checkered stock made from the cream of pallets!!)
so no corners left uncut when you get mine! :lol:
juss sayin like!
AA S200
Walther LGU
Westlake fit for the bin
Webley Raider 10
Walther underlever
1st Grand Order member

no avatar
fiestazetecmk2
Posts: 117
Joined: Mon Feb 16, 2015 11:35 pm

Re: SMK xs 19 part 1 the evaluation

Wed Mar 11, 2015 7:17 am

I had a xs19 custom carbine,I fitted ww. Trigger polished everything ,made it easy to cock,smooth hardly any recoil,and very accurate,you will enjoy it,I did mine ,if you fit a titan xs spring it will go over 12 ft, you'll need a coil off because I did,then it was 11 ft bang on,the ww,trigger will transform the gun,and it's fully adjustable.
Tx200hc.22 .cs1000 stock,hawke varmint sf 6-24-44

Post Reply

Who is online

Users browsing this forum: No registered users and 108 guests