timbum drop in kit

[eddie666]

Maybe in the future I will fit one and make my own conclusions,my mk2 tx200hc is very good at present ,I may be supprised who knows ,but thanks for the very informative test, fair play to you for taking the time to put a detailed test like that on the forum,

I fitted a Tinbum kit to my tx to cure the twanging that it suffered from, and it did the job admirably

But If your TX is very good and you are happy with it LEAVE IT ALONE

was the new spring guide a tight fit in the spring over the tx one ?

[GrandadG]

Maybe in the future I will fit one and make my own conclusions,my mk2 tx200hc is very good at present ,I may be supprised who knows ,but thanks for the very informative test, fair play to you for taking the time to put a detailed test like that on the forum,

I fitted a Tinbum kit to my tx to cure the twanging that it suffered from, and it did the job admirably

But If your TX is very good and you are happy with it LEAVE IT ALONE

was the new spring guide a tight fit in the spring over the tx one ?

yes, it was a much better fit

[Stokie99]

I put one in my hw98 which was 2 weeks old and twanging its bag off It did a great job as the 98 has no original top hat it is now a pleasure to shoot after further polishing of the piston and Sears it is twang less. , I found the hw spring to harsh so I put a Titan in and after loosing some coils it is shooting at a great 10.5 which is plenty for a 177 nice and smooth ,stokie99

[tony1]

got a vortek kit in my tx, made quite abit of difference. the chap i got it from now imports them from the usa and only lives about four miles from me.

[Urbanfox]

Good write up Timmytree, I droped one into a HW98 which I had cut half a coil off due to it being 11.8ftlbs.
From 10.8ftlbs ish it then went to, with the tbm kit to 11.2ftlbs and very consistent fps.
atb
bri