Wanted special tool

no avatar
Brendon1997
Posts: 3
Joined: Mon Jun 05, 2017 10:34 pm

Wanted special tool

Mon Jun 05, 2017 10:41 pm

Hello guys, I've a air arms s200mk3 and have bought a pressure guage for it but need the little tool that looks like a big nut that goes over the gold fill valve and locks on in the 2 holes with 2 steel bars, which then allows me unscrew the valve from the cylinder, I was wondering if any of yous had one of those little tools I could buy? As I've tried all over the internet and they are all out of stock, many thanks brendon

no avatar
eboswan
Site Admin
Posts: 3222
Joined: Sun Feb 15, 2015 9:16 am
Location: swansea

Re: Wanted special tool

Mon Jun 05, 2017 10:58 pm

Leave a message for Julian in the spares section I'm sure he can get you one .
IS MY SIGNATURE BIGGER THAN RAYS. Cz 452 american .22+sak mod
S200. .177

no avatar
Brendon1997
Posts: 3
Joined: Mon Jun 05, 2017 10:34 pm

Re: Wanted special tool

Mon Jun 05, 2017 11:04 pm

Hi mate, thankyou I've just posted mate

no avatar
davyt63
Moderator
Posts: 188
Joined: Mon Feb 16, 2015 9:43 pm

Re: Wanted special tool

Wed Jun 07, 2017 10:32 pm

A decent set of circlip plyers will do the job,or if you have access to a jigsaw and welder you Can make one like I did.on the same design of a angle grinder spanner.
did i mention,i have done one less meet then Ray, lol.

User avatar
Raj
Posts: 2005
Joined: Sun Feb 15, 2015 9:36 pm
Location: Rugby

Re: Wanted special tool

Thu Jun 08, 2017 6:26 pm

http://www.altaros.cz/en/cz/10-regulato ... /|demoTab3

Scroll down when the link opens and look at the 3rd tab - Instructions ;)
“It's the Indian, not the arrow"

Post Reply

Who is online

Users browsing this forum: No registered users and 23 guests