Page 1 of 1

S200 Fill Adaptor - T-Bar Type

Posted: Wed Feb 08, 2017 4:40 pm
by Raj
Does anyone have a spare front end fill adaptor for the S200? Perhaps removed and not required because you have fitted a pressure gauge etc.
New ones are going for £15 at Best Fittings.

Re: S200 Fill Adaptor - T-Bar Type

Posted: Wed Feb 08, 2017 7:34 pm
by GrandadG
I don't have a spare i'm afraid, but found some on the bay Raj!
£11.75 post free :)

Re: S200 Fill Adaptor - T-Bar Type

Posted: Thu Feb 09, 2017 7:35 am
by Raj
Sorry ... didnt make myself clear. I have the adaptor - I am after the filler valve to replace the one on my S200 which seems to have sprung a leak. It is the old type so I would rather replace it with the new type and make it same as all the others in the cabinet.

Re: S200 Fill Adaptor - T-Bar Type

Posted: Thu Feb 09, 2017 5:56 pm
by GrandadG
My mistake Raj, i didn't read your post correctly :oops:

Re: S200 Fill Adaptor - T-Bar Type

Posted: Thu Feb 09, 2017 8:33 pm
by Raj
Update ... I dont need o change anything. I filled up th etank to 180bar, sprayed it with oil and stuck it in water. The old filler valve itself is sound. Th eleak was from the o-ring between the air tube and the brass filler end plug. I had a few spares knocking about. Have replaced and all is well again !!! :)