Can a silencer be fitted to a TX200 Mk2?

Can a silencer be fitted to a TX200 Mk2?

Postby Veloman » Thu Jan 04, 2018 8:33 pm

The subject says it all really.
My Mk2 has a sort of moderator (at least that is what i think it is) fitted to the end of the barrel. The retaining part for the cocking lever is attached to this. I would imagine that if a silencer could be fitted the moderator would have to be removed. Unfortunately doing that would also remove the cocking lever retainer. I would really like to make the TX as quiet as possible. Can anyone enlighten me on this or am I stuck with what I have? Thanks
Veloman
 
Posts: 4
Joined: Sun Dec 31, 2017 8:39 pm

Re: Can a silencer be fitted to a TX200 Mk2?

Postby orik » Fri Jan 05, 2018 5:19 pm

I've got a MK2 which was bought second hand. Previous owner had modified the barrel weight so a 1/2" unf male threaded silencer can be screwed on. Cam't remember who I had it off but I'd say anyone with a lathe would be able to modify it.
Mk2 TX 200 Tony Leech 22mm internals
MK3 TX200 Modified 22mm internals
orik
 
Posts: 4
Joined: Mon Feb 16, 2015 4:35 pm
Location: Azat-le-Ris. France

Re: Can a silencer be fitted to a TX200 Mk2?

Postby Veloman » Sun Jan 07, 2018 8:16 pm

Thanks, I presume the barrel weight you refer to is the larger diameter barrel end that I thought was a kind of moderator? I 'll look into the possibilities of getting a suitable thread put on the end.
Veloman
 
Posts: 4
Joined: Sun Dec 31, 2017 8:39 pm

Re: Can a silencer be fitted to a TX200 Mk2?

Postby orik » Sun Jan 07, 2018 8:34 pm

A few pics of my mk2,

https://imgur.com/a/qGx2X
Mk2 TX 200 Tony Leech 22mm internals
MK3 TX200 Modified 22mm internals
orik
 
Posts: 4
Joined: Mon Feb 16, 2015 4:35 pm
Location: Azat-le-Ris. France


Return to Spring guns and tuning

Who is online

Users browsing this forum: No registered users and 2 guests