Tx 200 spread

Tx 200 spread

Postby KeithS » Fri Feb 03, 2017 6:11 pm

What power spread do your TX's have?
KeithS
 
Posts: 137
Joined: Mon Apr 13, 2015 6:58 pm
Location: Hull

Re: Tx 200 spread

Postby TX22hunter » Tue Feb 07, 2017 10:56 pm

My .22/HC runs 11.43-11.47fpe, couldn't tell you what that is in FPS though cos I forgot to check... :lol:
TX22hunter
 
Posts: 9
Joined: Sun Feb 05, 2017 10:30 pm

Re: Tx 200 spread

Postby fiestazetecmk2 » Fri Feb 10, 2017 10:07 pm

10.5 to 10.9.all day long on my chrono.rws superdomes. 22.with tinbum kit.
Tx200hc.22 .cs1000 stock,hawke varmint sf 6-24-44
fiestazetecmk2
 
Posts: 109
Joined: Mon Feb 16, 2015 11:35 pm
Location: cambridgeshire.

Re: Tx 200 spread

Postby dazzler » Sat Feb 25, 2017 12:59 pm

May I ask you what tinbum bits you fitted? I'm of the understanding that the piston runs on delrin rings as standard, so I am wondering where the improvements have been made? Thinking of buying a .177 TX so your help will come in handy at some point.

Thanks

Bobby
Pain or damage don't end the world. Or despair or f...... beatings. The world ends when you're dead. Until then, you got more punishment in store. Stand it like a man, and give some back.

Albert Swearengen
Deadwood
Circa 1878
dazzler
 
Posts: 56
Joined: Thu Jul 14, 2016 1:57 pm
Location: Burnley NWUK

Re: Tx 200 spread

Postby TX22hunter » Sun Mar 12, 2017 8:58 am

dazzler wrote:May I ask you what tinbum bits you fitted? I'm of the understanding that the piston runs on delrin rings as standard, so I am wondering where the improvements have been made? Thinking of buying a .177 TX so your help will come in handy at some point.

Thanks

Bobby


Fiesta pm'd me by mistake I think...

It'll be a top hat/spring guide kit, there will be some slip washers and power washers in there as well...
TX22hunter
 
Posts: 9
Joined: Sun Feb 05, 2017 10:30 pm

Re: Tx 200 spread

Postby Barnydaddy » Mon May 15, 2017 1:14 am

16.2 fpe.
8.64 H&N FTT at 915fps
User avatar
Barnydaddy
 
Posts: 9
Joined: Sat Feb 21, 2015 3:17 am

Re: Tx 200 spread

Postby Roj 252 » Sun Sep 03, 2017 7:33 am

Hi ! My Tx is relatively new and has been crono'd a 2 or 3 times between 10.3 and 10.6 which I felt was disappointing as it's sold as a Full Power rifle..... ok I know it won't be 12 !!! But I expected at least low 11's

At that time it had only had about 1000 pellets thru it .... Will it improve ???

Cheers Roj
Roj 252
 
Posts: 13
Joined: Mon Aug 14, 2017 5:55 am
Location: Preston Lancs .... it's o'reet up ere tha' noze

Re: Tx 200 spread

Postby gary martin » Sun Sep 03, 2017 1:43 pm

Roj 252 wrote:Hi ! My Tx is relatively new and has been crono'd a 2 or 3 times between 10.3 and 10.6 which I felt was disappointing as it's sold as a Full Power rifle..... ok I know it won't be 12 !!! But I expected at least low 11's

At that time it had only had about 1000 pellets thru it .... Will it improve ???

Cheers Roj


at1000 cycles, it has in all honesty most likely bedded in by now. is it a full length or HC model. a full length will make power easier. if you are so concerned, contact AA, tell them that you would like a little more, explain you understand the law and are not trying to achieve FAC levels, they will send you free of charge some power washers.
gary martin
 
Posts: 660
Joined: Thu Feb 19, 2015 8:21 pm
Location: worcestershire

Re: Tx 200 spread

Postby Roj 252 » Sun Sep 03, 2017 8:22 pm

Oh Right !.... thanks very much for the info, its really appreciated. It is an HC so I am aware that they produce slightly lower figures. Obviously I need a margin to keep below the magic 12 No ! If they'll provide some washers that would be great as I have access to crono's at the club and my local dealer.

Thanks again !
Roj
Roj 252
 
Posts: 13
Joined: Mon Aug 14, 2017 5:55 am
Location: Preston Lancs .... it's o'reet up ere tha' noze

Re: Tx 200 spread

Postby Roj 252 » Sun Sep 03, 2017 8:29 pm

PS : Thanks Gary, before I do anything I'll get a few more Crono's done of the latest figures to be sure of the No's and then perhaps contact AA, as in the near future I'm planning on doing a bit of hunting, ..... as FPS means Prizes : -)

Cheers
Roj
Roj 252
 
Posts: 13
Joined: Mon Aug 14, 2017 5:55 am
Location: Preston Lancs .... it's o'reet up ere tha' noze

Next

Return to Spring guns and tuning

Who is online

Users browsing this forum: No registered users and 1 guest