Tx200hc mk3 stock screws

User avatar
Targe
Posts: 41
Joined: Tue Jan 19, 2016 4:56 am

Tx200hc mk3 stock screws

Tue Jan 26, 2016 9:13 pm

Hi
I have a problem with my front stock screws touching my cocking lever,

I've just bought this rifle second hand so i don't know if the last owner has tighten them to much or fitted the wrong ones?

I would say they are 3mm too long :|
This is what was fitted black FKE 10.9 and 16mm long, i think they are m5

I was thinking of replaceing them with stainless steel A4

Anyone know the proper length of the stock screws

Cheers for any help
Mic

no avatar
gaz
Posts: 13
Joined: Mon Feb 16, 2015 6:01 pm

Re: Tx200hc mk3 stock screws

Wed Jan 27, 2016 8:17 am

Hi,
I have the same rifle as you and the screws are much shorter than 16mm, don't know the size as not at home.

Gaz
RAPID 7 MK1 .22 WALNUT THUMBHOLE
THEOBEN EVOLUTION .20 WALNUT
TUNED HW77K .177
TUNED HW80K .22 WALNUT THUMBHOLE
TX200HC .177 CS800 STOCK DAVE PRICE RE-ENGINEERED
LGU SPECIAL EDITION .177 TUNED
TUNED SMK XS19 .177

User avatar
Targe
Posts: 41
Joined: Tue Jan 19, 2016 4:56 am

Re: Tx200hc mk3 stock screws

Wed Jan 27, 2016 5:13 pm

Cheers Gaz

I'm just guessing but by looking at mine i think they should be around 12mm or 13mm long
I have some m5 14mm stainless steel countersunk A4 ones on the way
5 for £1.30
I'll file to fit them ;)

Thanks
Mic

User avatar
Targe
Posts: 41
Joined: Tue Jan 19, 2016 4:56 am

Re: Tx200hc mk3 stock screws

Thu Jan 28, 2016 5:44 pm

Just a update ;)
I fitted the14mm stainless steel countersunk A4 today
And they fit perfectly no need to cut them,
The Tx200hc cocks perfectly now :mrgreen:

As the head on the stainless steel is about 1mm deeper that then ones originally fitted

Ebxy number: 191054024221
£1.30 free postage for 5

Cheers
Mic

no avatar
FPoole
Posts: 339
Joined: Mon Feb 16, 2015 2:37 am

Re: Tx200hc mk3 stock screws

Fri Jan 29, 2016 2:18 am

Back around 2000 this was a problem with some of the TX's. After the front screws were snugged up a few times they would compress the wood and hit the cocking arm. Some guns wouldn't cock and my gun was one of them. I just got a Dremel tool and cut off a little bit of screw.

User avatar
Targe
Posts: 41
Joined: Tue Jan 19, 2016 4:56 am

Re: Tx200hc mk3 stock screws

Fri Jan 29, 2016 4:48 pm

Cheers Fpoole for the information and help :)
Mine is a mk 3 hc from around 2009

Best way to check; is flip tx200 on its back and look at the alloy bracket,
If you see screw threads like mine (3mm) they are to long

Post Reply

Who is online

Users browsing this forum: No registered users and 16 guests