Air arms s410 low power

Air arms s410 low power

Postby Bullet » Sat Sep 09, 2017 10:42 pm

Hi everyone my 410 was very low on power when i bought it 6.5 ft/lb having read a few threads i stripped it down and the striker wasnt working correctly (hardened grease) so cleaned it off looking inside the striker it looked marked so cleaned off best i could i put back together and the power went upto 9.49 ft/lb should i buy the new striker with rod and spring as i wasnt really happy with the scoring marks inside the striker??
Bullet
 
Posts: 9
Joined: Sat Sep 09, 2017 9:54 pm

Re: Air arms s410 low power

Postby Roger5 » Sun Sep 10, 2017 8:32 am

Bullet wrote:Hi everyone my 410 was very low on power when i bought it 6.5 ft/lb having read a few threads i stripped it down and the striker wasnt working correctly (hardened grease) so cleaned it off looking inside the striker it looked marked so cleaned off best i could i put back together and the power went upto 9.49 ft/lb should i buy the new striker with rod and spring as i wasnt really happy with the scoring marks inside the striker??

There could be other things reducing the power i.e. Spring pressure on firing valve, power adjust screw, but if you are intent on changing hammer and striker rod, the striker rod is loctited in and will require a bit of heat to remove it. Rog
Roger5
 
Posts: 565
Joined: Sat Jul 25, 2015 8:04 am
Location: Hampton, Middlesex

Re: Air arms s410 low power

Postby Blackbaronfish » Sun Sep 10, 2017 9:29 am

If it has hardened grease,then it hasn't been serviced. Spend a little bit on your investment 8-)

BBF
Did I mention that I'm the only one to have attended every annual meet since we started
User avatar
Blackbaronfish
Super Admin
 
Posts: 2829
Joined: Sun Feb 15, 2015 6:20 pm
Location: Nuneaton

Re: Air arms s410 low power

Postby Bullet » Sun Sep 10, 2017 2:42 pm

Thanks for reply do you recommend any gunshop or person to do the job as i do not want to mess it up completely
Bullet
 
Posts: 9
Joined: Sat Sep 09, 2017 9:54 pm

Re: Air arms s410 low power

Postby Blackbaronfish » Sun Sep 10, 2017 4:25 pm

Fill out your location and we might know a place nearer home

BBF
Did I mention that I'm the only one to have attended every annual meet since we started
User avatar
Blackbaronfish
Super Admin
 
Posts: 2829
Joined: Sun Feb 15, 2015 6:20 pm
Location: Nuneaton

Re: Air arms s410 low power

Postby TenMetrePeter » Sun Sep 10, 2017 6:48 pm

Do people replace the bushes inside the hammer or isnt it worth the effort?
Do people lube the hammer rail at all? Dry moly like Dri-slide?
S400 MPR Precision 10m.
My Youtube
User avatar
TenMetrePeter
 
Posts: 506
Joined: Wed Jun 29, 2016 5:40 pm
Location: Luton England NOT EU

Re: Air arms s410 low power

Postby Bullet » Sun Sep 10, 2017 7:25 pm

The striker rod is marked and the 2 bushes need replacing ive seen the parts on chambers website and all the bits come to about £30 to £40 so not to bad but im not confident in doing my self i live in gateshead
Bullet
 
Posts: 9
Joined: Sat Sep 09, 2017 9:54 pm

Re: Air arms s410 low power

Postby Roger5 » Sun Sep 10, 2017 7:26 pm

TenMetrePeter wrote:Do people replace the bushes inside the hammer or isnt it worth the effort?
Do people lube the hammer rail at all? Dry moly like Dri-slide?

Hi Peter, price of bushes nearly equals price of hammer, not worth the aggravation, and I don't use any lube on striker rod, just a polish. Rog
Roger5
 
Posts: 565
Joined: Sat Jul 25, 2015 8:04 am
Location: Hampton, Middlesex

Re: Air arms s410 low power

Postby eboswan » Sun Sep 10, 2017 7:44 pm

Bullet wrote:The striker rod is marked and the 2 bushes need replacing ive seen the parts on chambers website and all the bits come to about £30 to £40 so not to bad but im not confident in doing my self i live in gateshead


If you req spares
Here...
https://www.airarmsspares.com/
IS MY SIGNATURE BIGGER THAN RAYS. Cz 452 american .22+sak mod
S200. .177
eboswan
Site Admin
 
Posts: 2423
Joined: Sun Feb 15, 2015 9:16 am
Location: swansea

Re: Air arms s410 low power

Postby Bullet » Sun Sep 10, 2017 8:05 pm

Striker and 2 bushes come to £17 so i think it worth buying and new rod is £9 so with a new spring £4.50 the job would be done properly
Bullet
 
Posts: 9
Joined: Sat Sep 09, 2017 9:54 pm

Next

Return to TECHNICAL

Who is online

Users browsing this forum: No registered users and 2 guests

cron