Carbon (or other) barrel shroud s4*0

no avatar
dazzler
Posts: 61
Joined: Thu Jul 14, 2016 1:57 pm

Carbon (or other) barrel shroud s4*0

Mon Aug 28, 2017 2:06 pm

Hi all,

Anyone know if these exist, and if so, where from and how much?

My barrel is a bit of (a lot of) a dog, but the gun shoots fine.

Thanks for your help everyone

ATB

Bobby
Pain or damage don't end the world. Or despair or f...... beatings. The world ends when you're dead. Until then, you got more punishment in store. Stand it like a man, and give some back.

Albert Swearengen
Deadwood
Circa 1878

User avatar
Blackbaronfish
Posts: 3690
Joined: Sun Feb 15, 2015 6:20 pm
Location: Nuneaton

Re: Carbon (or other) barrel shroud s4*0

Mon Aug 28, 2017 4:36 pm

eBay was selling carbon tubes and also TBT.

BBF
Did I mention that I'm the only one to have attended EVERY meet since we started

no avatar
TenMetrePeter
Posts: 1043
Joined: Wed Jun 29, 2016 5:40 pm
Location: Luton Beds UK

Re: Carbon (or other) barrel shroud s4*0

Mon Aug 28, 2017 5:34 pm

I bought this tube from Ebay for my MPR. 10 quid for 500mm - fortunately 14mm ID x16mm OD was a standard size. Your S400 may be 12mm? They are used to make drones and model 'copters. Took 3 weeks to come from China! The tube is cut to fit either side of the barrel band. Also had to file the last 2 inches into a wedge to fit between barrel and receiver body. 12mm S400 barrel may not need it??

Screen Shot 2017-08-28 at 18.27.17 (1 of 1).jpg
Screen Shot 2017-08-28 at 18.27.17 (1 of 1).jpg (30.06 KiB) Viewed 3774 times

no avatar
Archer50
Posts: 200
Joined: Mon Jun 20, 2016 5:06 pm
Location: Perth

Re: Carbon (or other) barrel shroud s4*0

Tue Aug 29, 2017 7:55 pm

Just search eBay for 'carbon tube' and you will find loads. I've used Katana Plastics and also easycomposites.co.uk before: a bit more than a tenner, but they both dispatch same working day and I'm impatient ;)

Alan

no avatar
dazzler
Posts: 61
Joined: Thu Jul 14, 2016 1:57 pm

Re: Carbon (or other) barrel shroud s4*0

Thu Aug 31, 2017 8:43 pm

Ok i'll take a look. How are these attached to the barrel by the way?

Cheers

Bob
Pain or damage don't end the world. Or despair or f...... beatings. The world ends when you're dead. Until then, you got more punishment in store. Stand it like a man, and give some back.

Albert Swearengen
Deadwood
Circa 1878

User avatar
gdavison
Posts: 366
Joined: Tue Feb 17, 2015 6:43 am
Location: Baughurst

Re: Carbon (or other) barrel shroud s4*0

Thu Aug 31, 2017 8:44 pm

dazzler wrote:Ok i'll take a look. How are these attached to the barrel by the way?

Cheers

Bob


they are not attached to the barrel ..
AA FTP900, AA HFT500, AA S510, FWB-800FT

no avatar
dazzler
Posts: 61
Joined: Thu Jul 14, 2016 1:57 pm

Re: Carbon (or other) barrel shroud s4*0

Fri Sep 01, 2017 8:30 pm

Ok cheers. What stops them moving around, or making noises whilst moving/stalking/shooting?

Bobby
Pain or damage don't end the world. Or despair or f...... beatings. The world ends when you're dead. Until then, you got more punishment in store. Stand it like a man, and give some back.

Albert Swearengen
Deadwood
Circa 1878

no avatar
Archer50
Posts: 200
Joined: Mon Jun 20, 2016 5:06 pm
Location: Perth

Re: Carbon (or other) barrel shroud s4*0

Sat Sep 02, 2017 2:14 pm

In a word, grease.

I give the barrel a good coating of lithium grease and slide the tube on. If you cut the tube accurately to length, the barrel band and moderator/stripper hold everything tight. The grease also stops moisture getting trapped under the tube, and is, in my view, pretty well essential. I've done this to five guns now, with no problems over three years.

Alan

no avatar
AA_Fanatic
Posts: 10
Joined: Sun Oct 01, 2017 10:18 am

Re: Carbon (or other) barrel shroud s4*0

Sun Nov 05, 2017 4:35 pm

Thanks guys for the idea - I went ahead and got a length of carbon fiber tubing - it was only £11 incl delivery and arrived after 2 days of ordering off of Ebay.

Looks bloody brilliant, with other folks at my local HFT wondering what type of S400 it is!
''You can't fight in here....this is the war room...'' Dr Strangelove.

S400 Classic, Custom 'Geordie Stocks' walnut thumbhole stock, Hawke Airmax SF30.

User avatar
Blackbaronfish
Posts: 3690
Joined: Sun Feb 15, 2015 6:20 pm
Location: Nuneaton

Re: Carbon (or other) barrel shroud s4*0

Sun Nov 05, 2017 5:42 pm

They do look nice don’t they 8-)

BBF
Did I mention that I'm the only one to have attended EVERY meet since we started

Post Reply

Who is online

Users browsing this forum: No registered users and 30 guests