Help on FTP 900 Trigger

User avatar
gdavison
Posts: 366
Joined: Tue Feb 17, 2015 6:43 am
Location: Baughurst

Help on FTP 900 Trigger

Mon Aug 14, 2017 5:25 pm

The 2nd hand FTP900 I just purchased has had its trigger set up in a way I really don't like .. there is no second stage . The previous owner swears blind he did not adjust it, however as the 3 * M3 * 8 bolts holding the trigger cover down are pretty much "rounded" I think he is telling porkies :)

Referencing the FTP900 trigger diagram in the manual - grub screw 24.1 & 24.2 are pretty much flat with the top surface of Middle Sear Block (part # RN305-2), grub Screw 28 is wound out so Trigger Pivot Block (part # RN320) is close to resting on the main block (part number E760)

Any pointers as to a useful set up instruction to get a second stage would be much appreciated

Thanks
AA FTP900, AA HFT500, AA S510, FWB-800FT

no avatar
TenMetrePeter
Posts: 1043
Joined: Wed Jun 29, 2016 5:40 pm
Location: Luton Beds UK

Re: Help on FTP 900 Trigger

Mon Aug 14, 2017 11:17 pm

Screen Shot 2017-08-15 at 00.10.49.jpg
Screen Shot 2017-08-15 at 00.10.49.jpg (78.04 KiB) Viewed 2930 times


This is a wierd trigger! I reckon 24-1 and 24-2 are both wound in too far if as you say they are flush. The 24-2 is doing the damage, and letting off before 24-1 has a chance to give a second stage feel. Try winding out 24-2 a turn and see what happens. You may need to wind them both out a bit.

I can't find any sensible adjustment instructions. Even the simpler S400 trigger has only a few sensible instructions written.

(If anyone read my earlier post that I deleted, it was due to a complete misunderstanding of the mechanism!)

User avatar
Blackbaronfish
Posts: 3690
Joined: Sun Feb 15, 2015 6:20 pm
Location: Nuneaton

Re: Help on FTP 900 Trigger

Tue Aug 15, 2017 5:56 am

Did I mention that I'm the only one to have attended EVERY meet since we started

no avatar
TenMetrePeter
Posts: 1043
Joined: Wed Jun 29, 2016 5:40 pm
Location: Luton Beds UK

Re: Help on FTP 900 Trigger

Tue Aug 15, 2017 6:49 am

I looked through both those yesterday. Like I said there are no sensible instructions!
Its the same with the S400. Only Rowan and people on here provided them. AA really dont want us to know HOW, only where the screws are.
I like Carl but "There's a screw ere and there's a screw ere " doesnt really cut it.

User avatar
gdavison
Posts: 366
Joined: Tue Feb 17, 2015 6:43 am
Location: Baughurst

Re: Help on FTP 900 Trigger

Tue Aug 15, 2017 12:24 pm

TenMetrePeter wrote:I like Carl but "There's a screw ere and there's a screw ere " doesnt really cut it.


:D

I though it was just me
AA FTP900, AA HFT500, AA S510, FWB-800FT

no avatar
TenMetrePeter
Posts: 1043
Joined: Wed Jun 29, 2016 5:40 pm
Location: Luton Beds UK

Re: Help on FTP 900 Trigger

Sat Aug 19, 2017 9:57 pm

Got anywhere with 2nd stage?

User avatar
gdavison
Posts: 366
Joined: Tue Feb 17, 2015 6:43 am
Location: Baughurst

Re: Help on FTP 900 Trigger

Sun Aug 20, 2017 7:23 am

TenMetrePeter wrote:Got anywhere with 2nd stage?


I did in the end, someone posted a picture of their "out of the box" trigger and by counting the screw threads visible I was able to get an idea of the relative positions of them all and used that as a starting point, then by tweaking from that point I managed to get something that feels much better and has a second stage :)

thanks all for the help
AA FTP900, AA HFT500, AA S510, FWB-800FT

Post Reply

Who is online

Users browsing this forum: No registered users and 22 guests