S510 - a bit worried

no avatar
mcmjohnson
Posts: 9
Joined: Sun May 15, 2016 4:02 pm

S510 - a bit worried

Mon Jul 31, 2017 12:53 pm

Hi all, I could do with a bit of advice please. I have a very nice ( unmolested, I believe ) S510 in .22 flavour. I put it over an F1 Chrony yesterday and found it was doing 11.32ft Lbs with RWS Superfields 15.9grains. Pressure was 150bar and it varied between 586 and 600fps. ( Average 593.7 )
I then tried it with JSB Exact Jumbo 5.52 and 15.89 grains. Again, 150 bar, variation was 598 - 605.4 fps with an average of 602fps giving 12.8ft lbs. Oooops!
My question is, should I get a regulator fitted and if so which one? Secondly, as I live in Somerset, is there anyone reasonably local who could fit it? I don't particularly want to post it or drive to the Midlands or further to get it done.
Any advice or opinions welcome. Best wishes,Mark

User avatar
Blackbaronfish
Posts: 3690
Joined: Sun Feb 15, 2015 6:20 pm
Location: Nuneaton

Re: S510 - a bit worried

Mon Jul 31, 2017 5:33 pm

Julian Bond... owner of the AAOC lives in Wellington. You can contact him on his spares thread in sales.

BBF
Did I mention that I'm the only one to have attended EVERY meet since we started

no avatar
supergnome
Posts: 14
Joined: Sat Jan 28, 2017 9:47 am
Location: north Lincs

Re: S510 - a bit worried

Mon Jul 31, 2017 6:03 pm

Try it with Bisley magnums at 21grains. See what that gives. Then worry if it's well over 12ft/lbs. David.
FTP 900
64 MPR

no avatar
eboswan
Site Admin
Posts: 3222
Joined: Sun Feb 15, 2015 9:16 am
Location: swansea

Re: S510 - a bit worried

Mon Jul 31, 2017 7:18 pm

no don't worry if its well over 12ft/lbs ...worry if its even close to 12ft/lbs
IS MY SIGNATURE BIGGER THAN RAYS. Cz 452 american .22+sak mod
S200. .177

no avatar
Roger5
Posts: 1071
Joined: Sat Jul 25, 2015 8:04 am
Location: Hampton middlesex

Re: S510 - a bit worried

Mon Jul 31, 2017 9:36 pm

If the antitamper is out, you should be able to fit an Altaros reg, no drilling of cylinder, so an easy fit, they work very well, just put one in a mates S510, 5fps over a 50 shot string. Rog

no avatar
Archer50
Posts: 200
Joined: Mon Jun 20, 2016 5:06 pm
Location: Perth

Re: S510 - a bit worried

Tue Aug 01, 2017 7:53 am

Whether you regulate it or not, every gun will give higher power outputs with some pellets than with others and there is no way of changing that. The safe thing to do is to try to find the most efficient pellet for your particular gun - in my experience, for Air Arms guns it's usually one of the heavier JSB's - and adjust until that gives something like 11.7 ft-lb at most. Then, I'm afraid you just have to live with whatever that gives you on other pellets.

Not good news, but I hope it helps you stay legal.

Alan

no avatar
Roger5
Posts: 1071
Joined: Sat Jul 25, 2015 8:04 am
Location: Hampton middlesex

Re: S510 - a bit worried

Tue Aug 01, 2017 9:41 am

Archer50 wrote:Whether you regulate it or not, every gun will give higher power outputs with some pellets than with others and there is no way of changing that. The safe thing to do is to try to find the most efficient pellet for your particular gun - in my experience, for Air Arms guns it's usually one of the heavier JSB's - and adjust until that gives something like 11.7 ft-lb at most. Then, I'm afraid you just have to live with whatever that gives you on other pellets.

Not good news, but I hope it helps you stay legal.

Alan

+1 on that. Rog

Post Reply

Who is online

Users browsing this forum: Google [Bot] and 24 guests