tx200hc low power

tx200hc low power

Postby captbarb67 » Mon Jul 10, 2017 10:50 am

Hi I've owned this rifle from new say 22 year approx and it's low on power today 6.5ftlbs using air arms 16 grain pellet it's a warm day rifle and pellet warm I'm telling you this two weeks ago I stripped and cleaned and was getting 11.6 ft lbs any ideas haven't changed seals for about 20 years.or is it temperature related.
captbarb67
 
Posts: 6
Joined: Mon Jun 12, 2017 9:23 pm

Re: tx200hc low power

Postby Roadworthy » Fri Aug 11, 2017 4:39 am

I don't think you'd lose nearly half your power because you were shooting on a hot day. It COULD be your piston seal but you might want to have a look at your spring or your breech seals. Note - there are two of them, one on top of the other.
Roadworthy
 
Posts: 26
Joined: Sun Feb 15, 2015 4:58 pm
Location: WA State, USA

Re: tx200hc low power

Postby TenMetrePeter » Fri Aug 11, 2017 6:39 am

+1
Stripping and cleaning a 20+ yr old rifle I would have renewed the piston and breech seals and spring. Unless the spring has busted its unlikely the spring has lost that much power in 2 weeks but the seals could have.
S400 MPR Precision 10m.
Green Belt in Ludo
My Youtube
User avatar
TenMetrePeter
 
Posts: 562
Joined: Wed Jun 29, 2016 5:40 pm
Location: Luton England NOT EU

Re: tx200hc low power

Postby gary martin » Sat Aug 12, 2017 5:25 pm

+2 think you may have answered your own question. Seals after 22 years are not going to be in great shape.
gary martin
 
Posts: 660
Joined: Thu Feb 19, 2015 8:21 pm
Location: worcestershire

Re: tx200hc low power

Postby Blackbaronfish » Sat Aug 12, 2017 8:25 pm

Fantastic to get 22 years out of them seals 8-) . The next lot should take it another 22 :mrgreen:
I think the old girl deserves a little pamper :lol: :lol: :lol:

BBF
Did I mention that I'm the only one to have attended every annual meet since we started
User avatar
Blackbaronfish
Super Admin
 
Posts: 2904
Joined: Sun Feb 15, 2015 6:20 pm
Location: Nuneaton


Return to TECHNICAL

Who is online

Users browsing this forum: No registered users and 1 guest

cron