S410 Firing problem.

no avatar
Stallard1982
Posts: 13
Joined: Thu May 04, 2017 12:15 am

S410 Firing problem.

Sat May 20, 2017 6:19 pm

So I seem to have double loaded my S410 .177 while testing out some Jsb Beast pellets, bit of a silly idea using 16 grain pellets in a .177 anyway I know :o .
The bolt is pulled back all the way and seems cocked, but it wont fire?
Any ideas what the hell I've done guys?
:oops:
Please help...

no avatar
Outandabout
Posts: 723
Joined: Tue Feb 17, 2015 8:13 pm
Location: Bishop Auckland Co Durham

Re: S410 Firing problem.

Sat May 20, 2017 8:09 pm

A daft question but is the gun charged. Just because the gauge is reading a pressure does not mean it has air in. Try putting a little air in and try again.
Kevin

User avatar
Blackbaronfish
Posts: 3690
Joined: Sun Feb 15, 2015 6:20 pm
Location: Nuneaton

Re: S410 Firing problem.

Sat May 20, 2017 8:52 pm

Take the side plate off and check the sears

BBF
Did I mention that I'm the only one to have attended EVERY meet since we started

no avatar
Stallard1982
Posts: 13
Joined: Thu May 04, 2017 12:15 am

Re: S410 Firing problem.

Sat May 20, 2017 8:52 pm

Yes the gun is charged.

no avatar
Stallard1982
Posts: 13
Joined: Thu May 04, 2017 12:15 am

Re: S410 Firing problem.

Sat May 20, 2017 8:54 pm

One I've taken the guard off what am I looking for with the sears?

no avatar
Outandabout
Posts: 723
Joined: Tue Feb 17, 2015 8:13 pm
Location: Bishop Auckland Co Durham

Re: S410 Firing problem.

Sat May 20, 2017 9:19 pm

There's a good vid on youtube. Check it out. Look for "S410 trigger sears". Watching it is easier then explaining it.
Cheers
Kevin

no avatar
Mark112
Posts: 210
Joined: Mon Feb 16, 2015 5:25 pm

Re: S410 Firing problem.

Sun May 21, 2017 7:10 am

Be careful though as you potentially have a loaded gun. Double loading itself is not a problem ... the pellets will fire out the barrel just fine. Unless you have put a whole magazines worth down the barrel!
S410C .177 Regged - MTC Viper 4-16 x 50
S410K .177 Regged - Hawke Nite-Eye 4-16 x 50 AO IR
S410K .22 - Hawke Sport HD 3-9 x 50 AO IR
Logun Mk1 .22 - AGS 3-9 x 40
Theoben Taunus .22 - Simmons 4-12 x 40 AO
BW1911R2
Walther CP99
Webley Premier .22

no avatar
Stallard1982
Posts: 13
Joined: Thu May 04, 2017 12:15 am

Re: S410 Firing problem.

Sun May 21, 2017 3:28 pm

All sorted now guys thanks for all the help. :D

no avatar
Outandabout
Posts: 723
Joined: Tue Feb 17, 2015 8:13 pm
Location: Bishop Auckland Co Durham

Re: S410 Firing problem.

Sun May 21, 2017 3:58 pm

What was the problem

no avatar
Stallard1982
Posts: 13
Joined: Thu May 04, 2017 12:15 am

Re: S410 Firing problem.

Sun May 21, 2017 8:05 pm

The top sear was in wrong position. :D

Post Reply

Who is online

Users browsing this forum: No registered users and 22 guests