So I seem to have double loaded my S410 .177 while testing out some Jsb Beast pellets, bit of a silly idea using 16 grain pellets in a .177 anyway I know .
The bolt is pulled back all the way and seems cocked, but it wont fire?
Any ideas what the hell I've done guys?
Please help...
S410 Firing problem.
- Outandabout
- Posts: 723
- Joined: Tue Feb 17, 2015 8:13 pm
- Location: Bishop Auckland Co Durham
Re: S410 Firing problem.
A daft question but is the gun charged. Just because the gauge is reading a pressure does not mean it has air in. Try putting a little air in and try again.
Kevin
Kevin
- Blackbaronfish
- Posts: 3690
- Joined: Sun Feb 15, 2015 6:20 pm
- Location: Nuneaton
Re: S410 Firing problem.
Take the side plate off and check the sears
BBF
BBF
Did I mention that I'm the only one to have attended EVERY meet since we started
- Stallard1982
- Posts: 13
- Joined: Thu May 04, 2017 12:15 am
Re: S410 Firing problem.
Yes the gun is charged.
- Stallard1982
- Posts: 13
- Joined: Thu May 04, 2017 12:15 am
Re: S410 Firing problem.
One I've taken the guard off what am I looking for with the sears?
- Outandabout
- Posts: 723
- Joined: Tue Feb 17, 2015 8:13 pm
- Location: Bishop Auckland Co Durham
Re: S410 Firing problem.
There's a good vid on youtube. Check it out. Look for "S410 trigger sears". Watching it is easier then explaining it.
Cheers
Kevin
Cheers
Kevin
Re: S410 Firing problem.
Be careful though as you potentially have a loaded gun. Double loading itself is not a problem ... the pellets will fire out the barrel just fine. Unless you have put a whole magazines worth down the barrel!
S410C .177 Regged - MTC Viper 4-16 x 50
S410K .177 Regged - Hawke Nite-Eye 4-16 x 50 AO IR
S410K .22 - Hawke Sport HD 3-9 x 50 AO IR
Logun Mk1 .22 - AGS 3-9 x 40
Theoben Taunus .22 - Simmons 4-12 x 40 AO
BW1911R2
Walther CP99
Webley Premier .22
S410K .177 Regged - Hawke Nite-Eye 4-16 x 50 AO IR
S410K .22 - Hawke Sport HD 3-9 x 50 AO IR
Logun Mk1 .22 - AGS 3-9 x 40
Theoben Taunus .22 - Simmons 4-12 x 40 AO
BW1911R2
Walther CP99
Webley Premier .22
- Stallard1982
- Posts: 13
- Joined: Thu May 04, 2017 12:15 am
Re: S410 Firing problem.
All sorted now guys thanks for all the help.
- Outandabout
- Posts: 723
- Joined: Tue Feb 17, 2015 8:13 pm
- Location: Bishop Auckland Co Durham
Re: S410 Firing problem.
What was the problem
- Stallard1982
- Posts: 13
- Joined: Thu May 04, 2017 12:15 am
Re: S410 Firing problem.
The top sear was in wrong position.
Who is online
Users browsing this forum: No registered users and 75 guests