Air Arms Owners Club

Lebon wrote:Guys can this o-ring be replaced with the filler valve body in place, or should I remove the filler valve body from the cylinder ??

You don't need to take filling valve body off, unscrew fill valve and refit with 0-ring seal over threads, when you screw it back it will sit in recess of fill valve body. You might find that there is already an 0-ring there, take it out. Rog

Do I need a special tool to remove the filler body?

I've already done this but the leak is still present, any ideas

is your cylinder flared at the end ?

I don't think so, but there is obviously something not right, is there a way to check the cylinder?

a metal ruler up against the end of the cylinder will show if its straight or flared .

Thanks I will try that.

If the cylinder is flared would that still cause the filler valve to leak, I would of thought the leak would of been between the cylinder and the valve body?? If the cylinder is flared at the end.

i think we're at cross purposes now , where exactly is it leaking from ?

The leak is from the filler valve where it screws into the filler body, I have checked and replaced all the seals, I'm completely out of ideas