AA S200 10 shot magazine system.

no avatar
Rossmofo
Posts: 34
Joined: Mon Mar 21, 2016 11:19 pm

AA S200 10 shot magazine system.

Fri Jul 08, 2016 7:26 am

Hi guys, I have fitted a 10 shot loader to my S200 and it's not playing ball, it indexes OK most of the time but strips the seal from the bolt ,I have tried adjilusting the index arm stop to alter the position of the hole in relation to the bolt but I have a feeling it still fouls on the way in to push pellet into barrel.
So was wondering if anyone has had similar problems and found a cure. Any tips would be good as I'm sure I must be missing something obvious ,there are thousands of these kits out there that work just fine.
Cheers.
Born with nothing and still have most of it .


S200 Mk3 .177
Air Arms HFT500 .177
Daystate Huntsman Regal .22
HW98 .177
SMK PP700W .177

no avatar
seadog
Posts: 11
Joined: Wed Sep 07, 2016 7:22 pm

Re: AA S200 10 shot magazine system.

Wed Sep 14, 2016 9:45 pm

I am having the exact same problem with my sons s200 it will work most of the time but then out of the blue will jam up solid driving me nuts at the point of changing it back to single shot

no avatar
Rossmofo
Posts: 34
Joined: Mon Mar 21, 2016 11:19 pm

Re: AA S200 10 shot magazine system.

Wed Sep 14, 2016 10:39 pm

Mine is currently back to a single shot ,can't say I miss the magazine anyway ...
Born with nothing and still have most of it .


S200 Mk3 .177
Air Arms HFT500 .177
Daystate Huntsman Regal .22
HW98 .177
SMK PP700W .177

no avatar
Roger5
Posts: 1071
Joined: Sat Jul 25, 2015 8:04 am
Location: Hampton middlesex

Re: AA S200 10 shot magazine system.

Wed Sep 14, 2016 10:52 pm

Rossmofo wrote:Hi guys, I have fitted a 10 shot loader to my S200 and it's not playing ball, it indexes OK most of the time but strips the seal from the bolt ,I have tried adjilusting the index arm stop to alter the position of the hole in relation to the bolt but I have a feeling it still fouls on the way in to push pellet into barrel.
So was wondering if anyone has had similar problems and found a cure. Any tips would be good as I'm sure I must be missing something obvious ,there are thousands of these kits out there that work just fine.
Cheers.

Best tip I can give you is to buy a Rowanengineering kit, I have them on both my S400s and on my S200 8 shot in .177 and 6 in .22. I have been using these for years, you have to index them yourself, but soon becomes second nature, brilliant bit of kit. Rog

no avatar
robertt
Posts: 111
Joined: Sun Feb 15, 2015 10:57 am

Re: AA S200 10 shot magazine system.

Tue Sep 20, 2016 10:12 am

Had similar issues which I resolved by using a bright torch at the action end then looking down the barrel and turning the Allen key till the magazine chamber was central. That was 3 years ago and it hasn't missed a beat since. The mag has locked when pellets weren't pushed home properly.

Post Reply

Who is online

Users browsing this forum: No registered users and 20 guests