AA TDR Leak

[Hawke]

Hi all,
i hope someome can advise me on the following issue
my tdr .22 has suddenly developed a bad leak.
i have performed the balloon test and there is no leak from barrell, filler or gauge itself
however i have found the leak and it is from the base of the silver gauge mount where it meets the underside of the action.

there is what appears to be a metal ring (pictured) on the action, is this permanent, removable, the manual seems to list it as part s427 ?
and secondly there would appear to be an o ring , part no s536 ? deep inside the silver mount where the hex screw for attaching the mount is located, does this need replacing also

thanks

[billywhizz]

Hawke ,if you give Julian bond a ring he will have the parts you need to put this right,probably just an o ring!!.http://www.airarmsspares.com/ you will find him here contact details all you need. I hope you get it sorted soon.

[bgaltd]

i've never seen a metal ring there before , it should be an o ring (S427) .

you'll need to replace both o rings to stop the leak .

S427 6 X 1 O RING 70 SHURE NITRILE 0.44- 0.04= 0.40
S536 BS008 O RING 70 SHURE 0.44- 0.04= 0.40

do you need any other parts etc ?

[Hawke]

Julian
thanks
pm sent

cheers

[bgaltd]

Julian
thanks
pm sent

cheers

and replied to .