S510 strip down (pic heavy)

Re: S510 strip down (pic heavy)

Postby BforBarney » Sun Apr 24, 2016 9:40 am

eboswan wrote:
BforBarney wrote:I tried this yesterday, I couldn't get the striker housing screw out or the barrel shroud off. I could put a piece of pipe down over the allen key for the striker screw for more leverage but I'd be putting serious pressure on it, when you say use a little heat for the barrel shroud what exactly do you mean, bic lighter? gas torch?


Hairdryer.


Thanks.
BforBarney
 
Posts: 32
Joined: Thu Jul 30, 2015 11:03 am

Re: S510 strip down (pic heavy)

Postby Sdrobo » Mon Aug 08, 2016 4:29 pm

Nice guide. I'd like to change my 410/510 converted tdr from .22 to .177 I have a .177 barrel what else do I need can I just machine down the pellet probe to the right dimensions? Thanks
Sdrobo
 
Posts: 9
Joined: Tue Apr 19, 2016 11:43 pm

Re: S510 strip down (pic heavy)

Postby Dav1dM » Sat Aug 05, 2017 5:17 pm

Hiya! I'd love to see the pictures here, but they seem to have been removed/ links broken? IS it possible to fix this, please or perhaps PM/ email them? I'd be very grateful, as my S510 will no longer hold air (was leaking, then dumped remaining air and will only hold pressure for an hour or so) and I want to strip it and replace seals/ O-rings.

Thank you.
Dav1dM
 
Posts: 2
Joined: Sat Aug 05, 2017 4:56 pm
Location: New Milton, Hampshire

Previous

Return to TECHNICAL

Who is online

Users browsing this forum: No registered users and 1 guest

cron