advice please

no avatar
Jpbud
Posts: 8
Joined: Sun Jan 21, 2018 12:33 pm

advice please

Sun Jan 21, 2018 7:52 pm

hi all, myS410 bolt is stiff & dosnt cycle to well,do i use grease or oil on it?
& where should the little O ring go,mine moves along the bolt.Thanks

no avatar
Bezzer
Posts: 31
Joined: Sun Nov 13, 2016 11:15 pm

Re: advice please

Sun Jan 21, 2018 9:22 pm

You can clean the bolt up, no real need for any lubricant but you'll have to take the action off to get to it proper , it probably won't be the actual bolt it'll be the hammer and the hammer rail that need cleaning/polishing up to smooth it out a bit, no need for any oil or grease on the hammer and rail. The O ring that is on the bolt shaft should be loose it's just a buffer between the bolt handle and action.

no avatar
TenMetrePeter
Posts: 1043
Joined: Wed Jun 29, 2016 5:40 pm
Location: Luton Beds UK

Re: advice please

Sun Jan 21, 2018 11:48 pm

I use black moly grease on the bolt every few months as its steel running in alloy.
But yes if that doesnt help you may need a strip down.

no avatar
Jpbud
Posts: 8
Joined: Sun Jan 21, 2018 12:33 pm

Re: advice please

Mon Jan 22, 2018 9:36 am

Thanks to both for advice, good to know

Post Reply

Who is online

Users browsing this forum: No registered users and 28 guests