Search found 25 matches
- Sat Dec 17, 2016 10:17 am
- Forum: AirArms Spares ( bgaltd )
- Topic: Barrel O-rings & hammer spring.
- Replies: 7
- Views: 7497
Re: Barrel O-rings & hammer spring.
Thanks BBF, My outer O-ring at the breech end of the transfer port was fairly chewed up & there was no o-ring in the space about 12mm forward of that where there's a gap between the barrel & brass. I used a tapered reamer & put a very shallow taper over 0.5mm on the breech where the barr...
- Wed Dec 14, 2016 7:31 pm
- Forum: AirArms Spares ( bgaltd )
- Topic: Barrel O-rings & hammer spring.
- Replies: 7
- Views: 7497
Re: Barrel O-rings & hammer spring.
Thanks for the reply tenmeterpeter. I've been scratching my head wondering why I can't see these seals on the parts diagrams. The brass 'barrel shim' as it's confusingly called on a few sites seems to be glued on the barrel I have. There's a groove which has an o ring on it on the other makes of PCP...
- Wed Dec 14, 2016 5:14 pm
- Forum: AirArms Spares ( bgaltd )
- Topic: Barrel O-rings & hammer spring.
- Replies: 7
- Views: 7497
Re: Barrel O-rings & hammer spring.
These o-ring grooves are on the outside of the brass breech tube, that the pellet goes into. I've had a look online & found lots of O-ring kits for an s410 that seem to go everywhere else but haven't found any that go over the brass tube or barrel to stop air leaking out between the barrel &...
- Tue Dec 13, 2016 9:58 pm
- Forum: AirArms Spares ( bgaltd )
- Topic: Barrel O-rings & hammer spring.
- Replies: 7
- Views: 7497
Barrel O-rings & hammer spring.
Hi All, I've stripped my 410 and found that the O-ring on the brass breech fitting us chewed up & there appears to be one missing in the gap between the brass part & shoulder of the barrel. So I'm after a couple of these o-rings if available. Also - my hammer spring is approx 64mm long &...
- Sat Jun 25, 2016 9:35 pm
- Forum: General airgun chat
- Topic: Lane Regulator.
- Replies: 23
- Views: 12595
Re: Lane Regulator.
Any updates on this?
I'm thinking of getting a regulator & looking at options.
Thanks,
Jim, Lincoln
I'm thinking of getting a regulator & looking at options.
Thanks,
Jim, Lincoln
- Fri Jun 24, 2016 1:37 pm
- Forum: Wanted Section
- Topic: Wanted : S410 magazine (.177)
- Replies: 2
- Views: 2237
Re: Wanted : S410 magazine (.177)
Pm sent Billy
- Thu Jun 23, 2016 5:00 am
- Forum: Wanted Section
- Topic: Wanted : S410 magazine (.177)
- Replies: 2
- Views: 2237
Wanted : S410 magazine (.177)
Hi all,
Anyone have a spare 177 magazine for sale?
Regards,
Jim, Lincoln
Anyone have a spare 177 magazine for sale?
Regards,
Jim, Lincoln
- Wed Jun 22, 2016 4:42 pm
- Forum: TECHNICAL
- Topic: Floppy s410 classic trigger
- Replies: 2
- Views: 1951
Re: Floppy s410 classic trigger
Interesting. Thanks for confirming guys.
- Tue Jun 21, 2016 9:22 pm
- Forum: TECHNICAL
- Topic: Floppy s410 classic trigger
- Replies: 2
- Views: 1951
Floppy s410 classic trigger
Hi All,
I've just bought a second / third..hand S410 and the trigger feels fine when the action is cocked, but after it's shot; the trigger blade is very loose. Are they all like this? If not then I guess it's missing a spring to push it forward.
Thanks in advance, Jim, Lincoln
I've just bought a second / third..hand S410 and the trigger feels fine when the action is cocked, but after it's shot; the trigger blade is very loose. Are they all like this? If not then I guess it's missing a spring to push it forward.
Thanks in advance, Jim, Lincoln
- Tue Jun 21, 2016 9:09 pm
- Forum: Old for sale and wanted
- Topic: NOW SOLD S410 classic .177 inc new FX3 pump and....
- Replies: 15
- Views: 9011
Re: S410 classic .177 inc new FX3 pump and....
Thanks for the 410 Greeny, looks fab! Pleasure doing business with you. Jim